Vehicle modelling of an EV using MATLAB Simulink

Vehicle modelling of an Electric Vehicle using MATLAB Simulink

Project Description

Here is project link: https://drive.google.com/drive/folders/1F315X1fCzxG2uxRSbo4EK9gKhlAQao9L?usp=drive_link

The main objective of this project is to take a normal bike and make a model for an electric bike using MATLAB simulation.

The bike we use now in day-to-day life consumes petrol and causes a lot of pollution and sound. As we all know petrol price is not going to be cheaper any more, and it cannot be made or produced easily. For a better future we need to accept a few changes. Best alternative to this problem is Electric bike; it runs on electricity and does not emit gas out of the system and makes least noise.

Introduction

In this project we are working on converting ACTIVA 6G into electric. We kept the model or chassis as it is; we changed the IC (internal combustion) engine with an electric motor. We kept the 2-wheeler bike experience the same as before by keeping the specs as it is.

Involved software

Implementation

  1. COLLECTING DATA OF ACTIVA 6G
  2. GETTING A SUITABLE DRIVE CYCLE
  3. CALCULATING PARAMETERS FOR BATTERY PACK AND MOTOR
  4. MATLAB SIMULINK WITH CALCULATED DATA
  5. MODEL OF ELECTRIC ACTIVE 6G

COLLECTING DATA OF ACTIVA 6G

For our model, ACTIVA 6G we added all the hardware the same as it is .We used specs as follows:

  1. Tyres and Wheels
  2. Dimensions
  3. Chassis and Suspension
  4. Brakes

GETTING A SUITABLE DRIVE CYCLE

We took a drive cycle which has our required parameters considering top speed, average speed, and speed variation. We have used the WLTC drive cycle with some modifications.

The picture shows the Drive cycle used in our modelling, in image it shows up to 200 seconds data vs. speed at that second. This is just a sample. We used a datasheet which carries data from the 1st second to1022th second .

CALCULATING PARAMETERS FOR BATTERY PACK AND MOTOR

MATLAB SIMULINK WITH CALCULATED DATA

All the calculated forces are added in this model of simulation, to give the base characteristics of the vehicle.

MODEL OF ELECTRIC ACTIVE 6G

Conclusion

This is the output of our mini project.

Leave a comment